5X Series Vertical Shaft Impact Crusher

5X series new sand making machine (centrifugal impact crusher) is widely used in various kinds of metal and non-metallic ores, cement, refractory matter, abrasives, glass raw materials, construction aggregate, machine-made sand, metallurgy and other industries. It is suitable for medium and fine crushing all kinds of ores and rocks with different hardness, such as iron ore, non-ferrous metal ore, corundum, bauxite, quartz sand, brown aluminum oxide, perlite, basalt and other high hardness materials.

Features

Working Principle

Material is divided into two parts by feeding hopper into sand-making machine, and one part by feeding hopper into high-speed rotating impeller, which is accelerated rapidly in impeller. The acceleration can reach hundreds of times of gravity acceleration. Then the material is ejected from the three uniformly distributed channels of impeller at the speed of 60-70 m/s. First of all, the material is ejected from the impeller. A part of the material collected and dropped around the distributor is impacted and broken, then impacted together on the material lining in the vortex support chamber, rebounded by the material lining, impacted obliquely upward to the top of the vortex chamber, and changed its direction of motion, turned downward to form a continuous material curtain. Such a piece of material is subjected to two or more probabilistic impacts, friction and grinding in the swirling crushing chamber. The crushing material is discharged from the lower discharge port. In the whole process of crushing, the materials impact and break each other, not directly contact with metal components, but with the material lining impact, friction and crushing, which reduces angle pollution, and prolongs the wear time of mechanical technology. The vortex flow inside the whirling chamber eliminates the dust pollution.

Model				5X7615	5X8522	5X9532	5X1145
Capacity (t/h)		Central Feeding with Circular Cascade Feeding		150~280	240～380	350～540	500～640
		Fully Central Feeding
				70~140	120~200	180~280	250~360
Max. Feeding Size (mm)			Soft Material	<35	<40	<45	<50
			Hard Material	<30	<35	<40	<45
Rotation Speed (r/min)				1700~1900	1500~1700	1300~1510	1100~1310
Double Motor Power (kW)				150	220	320	440
Overall Dimension LxWxH (mm)				4100×2300×2300	4140×2500×2700	4560×2600×2900	5100×2790×3320
Power Supply				380V，50Hz
Double Oil Oumps Motor’s Power (kW)				2x0.31
Thin Oil Lubrication Station		Safty Assurance		Dual oil pump system stabilize oil supply; switch-off automatically without oil flow or oil pressure;
				Air cooling system /water cooling system available; preheating-start engine adopted.
		Power of Oil Tank Heater(kW)		2